Dedicated Micros Eco4 Operations Instructions download pdf (Page 85)

Eco4

Activity

The unit supports Activity Detection on all video inputs. It enables cameras to automatically detect

any movement/changes within the video scene; this can trigger a number of operations such as FTP

alarm notication and an increase in recording rate.

A still image of the selected camera will be shown in the Grid Editor screen. To establish an Activity

zone, edit the cells displayed across the image.

This option should be used in conjunction with the Zone Inputs and Zone Actions menus.

Global Activity Mode Three options are available for Activity activation (specically in

relation to a PTZ camera).

Selecting ‘Active while at Preset 1’ will result in Activity mode

functioning only when the camera is at preset position 1.

Select ‘Active while camera not in motion’ for Activity mode to

function only when the camera is still.

Select ‘Always Active’ for Activity mode to be in constant

operation.

Activity Channel This is a drop down list of the video inputs on the unit, selecting

an input will display images from the corresponding video source.

Activity Sensitivity This option allows the sensitivity setting to be established for the

activity grid being congured. There are ve settings to choose

from: Indoor High, Indoor Low, Outdoor High, Outdoor Low,

Very Low.

Grid Editor Use the Grid Editor by placing cells in areas of the camera view

where movement will trigger an alarm. To enter cells navigate

across the image.

Intelligent Security & Fire Ltd

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 139 140

No comments

Dedicated Micros Eco4 Operations Instructions Page 85