Dedicated Micros Eco4 Operations Instructions download pdf (Page 60)

Eco4

Prole Record

It is possible to set the unit recording conguration based on specic priorities.

The Prole Record

feature allows different record rates, and quality settings to be used for unset, set and override

modes for all cameras. This can ensure event images are recorded at high quality, whilst normal

‘non event’ images are recorded at reduced setting, decreasing storage requirements.

What is Turbo mode?

Turbo mode allows video images from any analogue camera or 3rd Party IP recoded camera to

be recorded and streamed at the maximum possible rate without the need to congure individual

settings. Turbo mode must be set Globally and will result in MPEG record rates of 12.5pps@4CIF

and 25pps@2CIF/CIF/QCIF.

Note: When selected, there will be only ONE congurable Record Prole across ALL cameras.

The unit then matches the live transmission rate to the congured record rate. This enables

a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’ Live Transmission proles are

available for conguration (Network Settings->Live Transmissions). Low and Medium

transmission settings are congurable to allow video streaming over low bandwith IP

connections and are limited to CIF for this purpose.

Simple Record

Intelligent Security & Fire Ltd

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 139 140

No comments

Dedicated Micros Eco4 Operations Instructions Page 60